A partial list of typical liquids dried include:
- Aromatics – Benzene, Toluene, Xylene
- Saturated Hydrocarbons – Propane, Butane, Pentane, Hexane
- Unsaturated Hydrocarbons – Butadiene, Butene, Propylene-Propane Mixers
- Chlorinated Hydrocarbons – Methylene Chloride, Trichloroethylene, Trichloroethane
- Other Liquids – Ethanol, Vinyl Chloride, Acetone, Tetrahydrofuran, Deimehylacetamide, Methyl-Ethyl-Ketone, Ethylene Dichloride, Normal Paraffins, Kerosene, Lacquer Thinner.
LIQUIDS
Process Systems is capable of designing liquid dryers for many diverse applications.
Service: N-Butyl Chloride
Externally heat reactivated design, single tower using molecular sieves as the adsorbent
- Type of Operation: Batch
- Total Volume: 6,000 Gallons
- Utilities: 460 Volt, 3 PH, 60 HZ/110V, Single Phase, 60 HZ
- Purge Gas: Nitrogen
- Operation: Semi-automatic operation
Service: Methylene Chloride Batch Process
Externally heat reactivated design, single tower using Ion Exchange Resins
- Type of Operation: Batch
- Total Volume: 6000 Gallons
- Utilities: 460 V - 3 PH - 60 HZ, 150 PSIG Steam, Dry Instrument Air
- Operation: Manual
- Adsorbent: Dow Resin
Service: Ethanol Continuous Process
Externally heat reactivated design, dual tower, with Molecular Sieve Adsorbent
- Flow: 1 GPM
- Pressure: 20 – 50 PSIG
- Temperature: 77ºF
- Inlet Water Content: 50,000 PPM (WT)
- Outlet Water Content: 500PPM (WT)
- Utilities: 460/120V – 3/1PH –60HZ/120 PSIG Steam
- Purge Gas: Dry Carbon Dioxide Gas
Service: Ethanol Recirculation Process
Internal Heat Reactivated design using a dual tower, semi automatic operation with 3A ethanol grade molecular sieves
- Liquid: Ethanol
- Flow: 7-8 GPM
- Purge: 11 SCFM (Nitrogen)
- kW: 8.78
- Operation: Semi-Automatic
Related Links